Monday, 2 December 2013

SAIL-VARIOUS VACANCIES

STEEL AUTHORITY OF INDIA LIMITED
(A Government of India Enterprise)
DURGAPUR STEEL PLANT
DURGAPUR – 713203

SAIL, a Maharatna Company and a leading steel-making company in India with a turnover of around Rs.49350 crores (FY 2012-13) is in the process of modernizing and expanding its production units, raw material resources and other facilities to maintain its dominant position in the Indian steel market.
Durgapur Steel Plant (DSP) is one of the modernised integrated steel plants of SAIL, employing a motivated workforce of  around 12000 employees, is producer of Wheel & Axle for Railways, Structural for construction and semis in the form of Blooms and Billets. The entire plant is management system compliant through ISO 9001:2000 for Quality Management System, ISO 14001:2004 for Environment Management System, OHSAS 18001:2007 for Occupational Health & Safety and SA 8000:2008 for Social Accountability.
Durgapur Steel Plant, an unit of SAIL invites online application from energetic, result oriented and promising talent for recruitment to the following posts:
DETAILS  OF  POSTS :
(#) Operator-cum-Technician (Boiler Operation) and Attendant-cum-Technician (Cable Jointing) will be taken directly in S-3 and S-1 grade respectively.

    ELIGIBILITY: Matriculation and 3 years full time Diploma in relevant discipline of Engineering (Metallurgy / Mechanical / Electrical / Civil / Electronics / Chemical) from Govt. recognized Institute.             

     SELECTION PROCEDURE :
Eligible candidates will be required to appear in Written Test. On the basis of their performance in the Written Test they will be called for Interview. Information for Written test and Interview will be provided on our website www.sail.co.in.

      HOW TO APPLY :
Eligible and interested candidates would be required to apply online through SAIL’s website: www.sail.co.in (Career with SAIL). Before applying the candidates should ensure that they fulfill all the eligibility norms. Their registration will be provisional as their eligibility will be verified only at the time of interview. Mere issue of admit card / interview call letter will not imply acceptance of candidature. Candidature of a registered candidate is liable to be rejected at any stage of recruitment process or even on joining, if any information provided by the candidate is found to be false or not in conformity with the eligibility criteria at any stage or if candidate fails to produce valid documentary proof in support of his eligibility.
Before registering their applications on the website the candidates should possess the following:
a)         Valid e-mail ID, which should remain valid for at least one year.
b)   Pay in Slip (SBI Challan) / e-receipt of Rs. 250=00 or Rs.150=00 (as applicable for the posts given in V above) as application and processing fee for General/OBC candidates. SC/ST/PwD candidates to possess Pay in Slip (SBI Challan)/ e-receipt of Rs. 50=00 only as processing fee. The Pay in Slip (SBI Challan) / e-receipt (generated after successful completion of transaction) is to be downloaded from the website after filling in the required details.
c)    Candidates should have latest passport size colour photograph as well as photograph of signature in digital form (.jpg or .jpeg only of less than 500 kb size) for uploading with the application form. Same photograph should be affixed for the entire selection process whenever required.
d)   Candidates are advised to read carefully instructions for online submission of application. The same will be available in the website itself.
e)    Category (General/SC/ST/OBC Non Creamy layer/PwD/Ex-SM) once submitted in the application cannot be changed and no benefit of other category will be subsequently admissible.
f)    After applying online, the candidate is required to download the system generated Registration Slip with unique registration number and other essential details.
g)   Candidates are not required to send any document to Durgapur Steel Plant at this stage. The candidates will be allowed to appear in the Written Test only if they possess the valid Photo Admit Card which will be available for downloading from the SAIL website as per schedule indicated below.
h)   While filling online application, candidates must carefully follow all the steps. Incomplete application / application without fee / application not fulfilling any eligibility criteria will be rejected summarily. No communication will be entertained from the applicants in this regard.



NIT JAMSHEDPUR-FACULTY POSITIONS

http://nitjsr.ac.in/new/uploads/NITJSR%20ADVT%20FOR%20ADHOC%20FACULTY%20MF%20ECE%20CSE.jpg

CDAC PROJECT ENGINEER VACANCY

Centre for Development of Advanced Computing (C-DAC), a Scientific Society of the Ministry of Communications and Information Technology, Government of India invites applications form skilled and experienced professionals from multiple domains for its project requirements at Pune.

Name of the Post: Project Engineer - III
Specialization Position Code No. of Positions
PNE/KDAG-SD-PE-III/1311 1
PNE/NISG-SD-PE-III/1311 2
PNE/MDEG-HD-PE-III/1311 1
PNE/MDEG-SD-PE-III/1311 1
PNE/ACTS-MKTG-PE-III/1311 1
Name of the Post: Project Engineer - II
Specialization Position Code No. of Positions
PNE/AAI-LING-PE-II/1311 2
PNE/AAI-SA-PE-II/1311 1
PNE/AAI-SD-PE-II/1311 1
PNE/NISG-SD-PE-II/1311 2
PNE/GIST-SD-PE-II/1311 2
PNE/CES-SD-PE-II/1311 1
PNE/HCDC-WDEV-PE-II/1311 4
PNE/ACTS-FAC-PE-II/1311 3
PNE/ACTS-TCNC-PE-II/1311 1
PNE/GIST-MKTG-PE-II/1311 1
PNE/CES-ES-PE-II/1311 1
PNE/MDEG-HD-PE-II/1311 1
PNE/MDEG-SD-PE-II/1311 1
PNE/ACTS-PE-PE-II/1311 2
Name of the Post: Project Engineer - I
Specialization Position Code No. of Positions
PNE/AAI-LING-PE-I/1311 5
PNE/GIST-LING-PE-1/1311 2
PNE/AAI-SA-PE-I/1311 1
PNE/GIST-SD-PE-I/1311 5
PNE/GIST-SD-1-PE-I/1311 4
PNE/CES-SD-PE-I/1311 1
PNE/GSDG-SD-PE-I/1311 2
PNE/HPC-FTE-SD-PE-I/1311 3
PNE/EGOV-SD-PE-I/1311 1
PNE/HCDC-FD-PE-I/1311 1
PNE/GIST-TE-PE-I/1311 2
PNE/MDEG-HD-PE-I/1311 1
PNE/HPND-HD-PE-I/1311 2
PNE/HPND-SD-PE-I/1311 1
PNE/CES-ES-PE-I/1311 2
PNE/BIO-PE-I/1311 4
PNE/CFD-PE-I/1311 1
PNE/CAE-CSM-PE-I/1311 2
PNE/WDG-WD-PE-I/1311 1
PNE/HCDC-WD-PE-I/1311 2

Name of the Post: Project Assistant - I
Specialization Position Code No. of Positions
PNE/GIST-TA-PA-I/1311 1

POSITIONS :
Above mentioned positions are on contract for a fixed duration and against approved projects. No. of posts advertised may vary as per the project requirements with consolidated pay as per CDAC's norms.
AGE:
Maximum age limit will vary according to the experience asked for the post. Applicants belonging to the reserved category / Govt. employees would be eligible for relaxations according to the Government of India's norms.

HOW TO APPLY:
Last date for receipt of application: 06th December 2013 (06:00 P.M.)
Applicants working in Central/State Govt./PSU or any Govt. Undertaking are required to forward an online advance copy of the application and submit the applications through the proper channel by clearly mentioning the position code on the application.
Note:
1) Mere fulfillment of the above-mentioned qualifications etc., does not entitle a candidate to be called for interview. Where number of applications received in response to an advertisement is large, it may not be convenient or possible for the Organization to interview all the candidates. The Organization may restrict the number of candidates to be called for interview to a reasonable limit, on the basis of qualifications and experience higher than that of the minimum prescribed in the advertisement. The candidates should, therefore, furnish all the qualifications and experience possessed in the relevant field, over and above the minimum qualifications prescribed.

2) Candidates are required to produce their original certificates (Educational Qualification, Experience, Caste and Age proof) along with attested photocopies at the time of interview.

3) Applicants/Candidates who will not able to produce certificate of equivalency to degree for BFA/ Fine Arts qualification during interview will be considered against position of Project Assistant subject to fulfillment of other requirement/criteria.

HRD - Recruitment
Centre for Development of Advanced Computing (C-DAC)

Pune University Campus, Ganesh Khind,
Pune - 411 007,
Tel: +91-20-25503100/01/02
Fax: + 91-20-25503131

Wednesday, 31 July 2013

HEAT EXCHANGERS


Heat exchangers are devices used to transfer heat energy from one fluid to another. Typical heat exchangers experienced by us in our daily lives include condensers and evaporators used in air conditioning units and refrigerators.Boilers and condensers in thermal power plants are examples of large industrial heat exchangers. There are heat exchangers in our automobiles in the form of radiators and oil coolers. Heat exchangers are also abundant in chemical and process industries. There is a wide variety of heat exchangers for diverse kinds of uses, hence the construction also would differ widely. However, in spite of the variety, most heat exchangers can be classified into some common types based on some fundamental design concepts.

Tuesday, 30 July 2013

MECHANICAL PROPERTIES OF MATERIALS

1. MECHANICAL PROPERTIES
ØTensile, Compressive, Shear & Bulk Strength
ØDuctility
ØYield Strength
ØToughness
ØAnelasticity
ØViscoelasticity
ØHardness
ØCreep
ØFatigue
ØStress Relaxation

ØImpact Strength

TENSILE, COMPRESSIVE, SHEAR & BULK STRESS
ØUnder Tensile Stress, load increases length of material, whereas under Compressive Stress, load decreases length of material. In both cases, nature of stress-strain curve remains same
ØShear Stress is force per unit area parallel to surface area of specimen as shown in figure, which is measured in terms of angle of shear
ØShear stress (t) and shear strain (g) are related with each other by ‘Shear Modulus of Rigidity (G)’ 
   and given as t = G g
ØBulk Stress is force per unit area applied on material uniformly in all directions (hydrostatic pressure), so that material changes its volume without changing its shape

ØRatio of bulk stress to bulk strain is known as ‘Bulk Modulus’   [-dp / (dV/V)], where negative sign implies that as pressure increases, volume decreases

ØReciprocal of bulk modulus is known as ‘Compressibility

ØPoisson’s Ratio is ratio of strains in x or y-directions to that of in z-direction, i.e. u = - (ex / ez) = - (ey / ez) (normally lies in range of 0.25 – 0.35 for metals)

ØElongation in one direction (z-direction) produces compression in other two directions (x and y-directions)
DUCTILITY
ØMaximum percentage elongation for a material or maximum percentage reduction in cross-sectional area (normal to tensile stress) for a material without fracture
ØDuctility = % EL = [(change in length / original length) * 100]
ØDuctility = [(change in diameter / original diameter) * 100]
ØPure metals generally have ductility in range of 35 – 50 %
YIELD STRENGTH
ØStrength of material after which it starts yielding plastically without any appreciable increase in applied stress (perfectly plastic material)
ØDue to strain hardening, yield strength / stress of material goes on increasing up to maximum tensile / compressive strength after which, necking and subsequently fracture takes place

GENERALISED GAS EQUATION

An ideal gas is defined as one in which all collisions between atoms or molecules are perfectly elastic and in which there are no intermolecular attractive forces.

Ideal gas law is a generalization containing both Boyle's law and Charles's law as special cases and states that:

In such a gas, all the internal energy is in the form of kinetic energy and any change in internal energy is accompanied by a change in temperature. An ideal gas can be characterized by three state variables:
  • absolute pressure (P),
  • volume (V),
  • and absolute temperature (T).
The relationship between them may be deduced from kinetic theory and is called the Ideal gas law.

PV = kT = nRT
where
  • n is the total number of moles,
  • NA = Avogadro's Number = 6.02217 · 1023 molecules/mole,
  • R = Universal gas constant = 8.314 J/K · mol ,
  • k = Boltzmann Constant = R/NA = 1.380622 · 10-23 J/K.
The ideal gas law can be viewed as arising from the kinetic pressure of gas molecules colliding with the walls of a container in accordance with Newton's laws. But there is also a statistical element in the determination of the average kinetic energy of those molecules. The temperature is taken to be proportional to this average kinetic energy; this invokes the idea of kinetic temperature.

Monday, 29 July 2013

ARCHIMEDES PRINCIPLE

Any body completely or partially submerged in a fluid is buoyed up by a force equal to the weight of the fluid displaced by the body.
Everyone has experienced Archimedes' principle. As an example of a common experience, recall that it is relatively easy to lift someone if the person is in a swimming pool whereas lifting that same individual on dry land is much harder. Evidently, water provides partial support to any object placed in it. The upward force that the fluid exerts on an object submerged in it is called the buoyant force.

According to the Archimedes' principle,
The magnitude of the buoyant force always equals the weight of the fluid displaced by the object.

The buoyant force acts vertically upward through what was the center of gravity of the displaced fluid.
                  B = 
Where B is the buoyant force and W is the weight of the displaced fluid.
The units of the buoyant force and weight are newton ( N ) in SI and "pound force" ( lbf) in British Engineering units.

The buoyant force acting on the steel is the same as the buoyant force acting on a cube of fluid of the same dimensions. This result applies for a submerged object of any shape, size, or density.

Buoyant Forces

HOOK'S LAW OF STRESS & STRAIN

The generalized Hooke's Law can be used to predict the deformations caused in a given material by an arbitrary combination of stresses.

The linear relationship between stress and strain applies for   
Original Specimen



where:


E is the Young's Modulus
n is the Poisson Ratio


The generalized Hooke's Law also reveals that strain can exist without stress. For example, if the member is experiencing a load in the y-direction (which in turn causes a stress in the y-direction), the Hooke's Law shows that strain in the x-direction does not equal to zero. This is because as material is being pulled outward by the y-plane, the material in the x-plane moves inward to fill in the space once occupied, just like an elastic band becomes thinner as you try to pull it apart. In this situation, the x-plane does not have any external force acting on them but they experience a change in length. Therefore, it is valid to say that strain exist without stress in the x-plane.

NEWTON'S LAW OF COOLING


Newton's Law of Cooling states that the rate of change of the temperature of an object is proportional to the difference between its own temperature and the ambient temperature.

Where  is the rate of change of temperature of an object with respect to time t.
 is the ambient temperature and K is the experimental constant 
From intial condition,   is obtained as follow

K can experimentally be found easily knowing that ,

VAPOUR COMPRESSION REFRIGERATION CYCLE

Vapor Compression Refrigeration Cycle

One of the applications that involves thermodynamic principles is the refrigerator. The figure below is a schematic diagram of the components found in a typical refrigerator.

The refrigerant enters the compressor as a slightly superheated vapor at a low pressure. It then leaves the compressor and enters the condenser as a vapor at some elevated pressure, where the refrigerant is condensed as a result of heat transfer to cooling water or to the surroundings. The refrigerant then leaves the condenser as a high-pressure liquid. The pressure of the liquid is decreased as it flows through the expansion valve and, as a result, some of the liquid flashes into vapor. The remaining liquid, now at a lower pressure, is vaporized in the evaporator as a result of heat transfer from the refrigerated space. This vapor then enters the compressor.
Vapor Compression Refrigeration Cycle

LAWS OF THERMODYNAMICS


Thermodynamics is the study of relationship between energy and entropy, which deals with heat and work. It is a set of theories that correlate macroscopic properties that we can measure (such as temperature, volume, and pressure) to energy and its capability to deliver work. A thermodynamic system is defined as a quantity of matter of fixed mass and identity. Everything external to the system is the surroundings and the system is separated from the surroundings by boundaries. Some thermodynamics applications include the design of:
  • air conditioners and refrigerators
  • turbo chargers and superchargers in automobile engines
  • steam turbines in power generation plants
  • jet engines used in aircraft

Zeroth Law of Thermodynamics

The zeroth law of thermodynamics states that when two bodies have equality of temperature with a third body, they in turn have equality of temperature with each other. All three bodies share a common property, which is the temperature. For example: one block of copper is brought into contact with a thermometer until equality of temperature is established, and is then removed. A second block of copper is brought into contact with the same thermometer. If there is no change in the mercury level of the thermometer during this process, it can be said that both blocks are in thermal equilibrium with the given thermometer.
First Law of Thermodynamics

The first law of thermodynamics states that, as a system undergoes a change of state, energy may cross the boundary as either heat or work, and each may be positive or negative. The net change in the energy of the system will be equal to the net energy that crosses the boundary of the system, which may change in the form of internal energy, kinetic energy, or potential energy. The first law of thermodynamics can be summarized in the equation:

Where:
 is the heat transferred to the system during the process 
 is the change in internal energy

 is the change in kinetic energy

 is the change in potential energy

 is the work done by the system during the process



Second Law of Thermodynamics

The second law defines the direction in which a specific thermal process can take place. The second law of thermodynamics states that it impossible to construct a device that operates in a cycle and produces no effect other than the transfer of heat from a cooler body to a hotter body. The second law of thermodynamics is sometimes called the law of entropy, as it introduces the important property called entropy. Entropy can be thought of as a measure of how close a system is to equilibrium; it can also be thought of as a measure of the disorder in the system.
Reversibility

A reversible process for a system is defined as a process that, once having taken place, can be reversed and leaves no change in either system or surroundings. The difference between a reversible and an irreversible process can be illustrated with the example below.
Suppose a gas under pressure is contained in a cylinder fitted with a piston. The piston is locked in place with a pin. If the pin is removed, the piston is raised and forced abruptly against the stopper. Work is done by the system during this process because the piston has been raised by a certain amount. If the system has to be restored to its initial state, force has to be exerted on the piston until the pin can be reinserted. Since the pressure on the face of the piston is greater on the return stroke than on the initial stroke, the work done on the gas is greater on the return stroke than the work done by the gas in the initial process. This caused an amount of heat to be transferred from the gas to the surroundings in order that the system have the same internal energy. The fact that work was required to force the piston down and that heat was transferred to the surroundings during the reverse process makes the system an irreversible process. 
Reversibility

Another system has a number of weights loaded on the piston at the initial state. The weights are removed from the piston one at a time, allowing gas to expand and do work in raising the weight remaining. If the process is reversed, the weight can be placed back onto the piston without any work requirement, as for each level of the piston there will be a small weight that is exactly at the level of the platform. Such a process is a reversible process. There are many factors that render a process irreversible, such as friction and unrestrained expansion. 


Thus, to summarize, reversible systems occur in situations when the system is essentially in equilibrium during the transition and at each step, and only an infinitesimal amount of work would be necessary to truly restore equilibrium. 
Reversible Systems

PASCAL'S LAW OF PRESSURE

Pascal's law : Developed by French mathematician Blaise Pascal states that when there is an increase in pressure at any point in a confined fluid, there is an equal increase at every other point in the container.

Definition of pressure:
If F is the magnitude of the normal force on the piston and A is the surface area of a piston, then the pressure, P, of the fluid at the level to which the device has been submerged as the ratio of the force to area.


Since the pressure is force per unit area, it has units of N/m2 in the SI system.
Another name for the SI unit of pressure is Pascal (Pa)


An important application of Pascal's law is the hydraulic press. A force F1 is applied to a small piston of area A1. The pressure is transmitted through a liquid to a larger piston of area A2. Since the pressure is the same on both sides, we see that P = F1/A1 = F2/A2. Therefore, the force F2 is larger than F1 by multiplying factor A2/A1. Hydraulic brakes, car lifts, hydraulic jacks, and forklifts all make use of this principle.
Hydraulic Jacks

ONLINE MASTER'S DEGREE IN MECHANICAL ENGINEERING

In the following table you will find statistics on several of the top online Master of Engineering programs being offered in the United States.
Many schools report their courses required in terms of credit hours. 


SchoolMasters ProgramsPrice Per CourseCourses RequiredStudent enrollment
Bagley College of Engineering at Mississippi State University
  • Civil Engineering
  • Computer Engineering
  • Electrical Engineering
  • Industrial Engineering
Also offers Certificate Program in Six Sigma
$3,30011 courses2,000
Colorado State University
  • Systems Engineering
  • Civil Engineering (Water Resource Management)
  • Biomedical Engineering
  • Mechanical Engineering (Engineering Management, Industrial Engineering and Operations Research, Materials Engineering)
Also offers Certificate Program in Transportation Engineering
$1,79410 courses126
Drexel University
  • Computer Science
  • Software Engineering - Computer Science and Information Science & Technology tracks available
  • Electrical Engineering
  • Engineering Management
Also offers Certificate Programs in:
  • Power Engineering Management
  • Engineering Management
  • Infrastructure Engineering Management
$2,88015 - 17 coursesNot provided
John Hopkins University, Engineering for Professionals Program
  • Bioinformatics
  • Environmental Planning and Management
  • Computer Science
  • Systems Engineering
$2,88510 courses800
Kansas State University
  • Chemical
  • Civil
  • Electrical
  • Mechanical
  • Operations Research
  • Engineering Management
  • Software Engineering
$1,91110 courses120
NC State Graduate School
  • Aerospace Engineering
  • Civil Engineering
  • Chemical Engineering
  • Electrical Engineering
  • Industrial Engineering
  • Materials Science and Engineering
  • Mechanical Engineering
  • Nuclear Engineering
  • Integrated Mfg Systems Engineering
  • Environmental Engineering
  • Engineering
  • Computer Engineering
  • Computer Science
$810 for NC residents
$2,100 for non-residents
10 – 11 courses900
Southern Methodist University, Lyle School of Engineering
  • Computer Engineering
  • Computer Science
  • Security Engineering
  • Software Engineering
  • Electrical Engineering
  • Electrical Engineering - Telecom Design Specialization
  • Engineering Management
  • Information Engineering and Management
  • Operations Research
  • Systems Engineering
  • Civil Engineering
  • Environmental Engineering
  • Mechanical Engineering
  • Manufacturing Systems Management
$3,60010 courses1,000
Stevens Institute of Technology
  • Mechanical Engineering
  • Pharmaceutical Manufacturing
  • Microelectronics and Photonics
  • Network Information System
  • Computer Engineering
  • Engineering Management
  • Security and Privacy
  • Software Engineering
  • Systems Engineering
$3,30010 courses2,000
University of Alabama
  • Aerospace Engineering
$1,00012 courses40
University of Alabama Huntsville
  • Engineering Management
  • Systems Engineering
  • Industrial Engineering
  • Rotorcraft Systems Engineering
  • Missile Systems Engineering
Also offers Certificate Programs in:
  • Engineering Management Theory
  • Project Engineering Management
  • Systems Engineering
  • Applied Statistics
$1,620 for AL residents
$2,150 for non-residents
12 courses676
University of North Dakota
  • Environmental Engineering
$1,730 for ND residents
$2,560 for non-residents
10 courses300

NEWTON'S LAWS OF MOTION

These force laws, together with the laws of motion, are the foundations of classical mechanics. They are based on experimental observations and were formulated more than three centuries ago by Isaac Newton (1642-1727).
1st Law of Motion:

An object at rest remains at rest and an object in motion will continue in motion with a constant velocity (that is, constant speed in a straight line) unless it experiences a net external force.
In other words, when the net force on a body is zero, its acceleration is zero. That is, when , then a = 0.

Where F is the force on a body and is its acceleration.

Newton's first law is sometimes termed simply the "Law of Inertia".
2nd Law of Motion:

Newton stated that the force on a particle is equal to the rate of change of its linear momentum, which is the product of its mass and velocity.

In other words, the acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass.

Mathematical statement of Newton's second law:

Vector expression:

Component equations
Units of Force and Mass
The SI unit of force is the newton, which is defined as the force that, when acting on a 1-kg mass, produces an acceleration of 1 m/s2. From this definition and Newton's second law, we see that the newton can be expressed in terms of the following fundamental units of mass, length, and time:
Definition of dyne: 1 dyne = 1 g · cm/s2

In the British engineering system, the unit of force is the pound, defined as the force that, when acting on a 1-slug mass, produces an acceleration of 1 ft/s2:

Definition of pound: 1 lb = 1 slug.ft/s2
Since 1 kg = 103 g and 1 m = 102 cm, it follows that 1 N = 105 dynes. It is left as a problem to show that 1 N = 0.225 lb.

The slug is the unit mass in the British engineering system and is that system's counterpart of the SI kilogram.
Units of force, Mass, and Acceleration
System of Units
Mass
Acceleration
Force
SI
kg
m/s2
N = kg · m/s2
cgs 
g
cm/s2
dyne = g · cm/s2
British engineering
slug
ft/s2
lb = slug.ft/s2

Definition of newton: 1 N = 1 kg · m/s2

The unit of force in cgs system is called the dyne and is defined as the force that, when acting on a 1-g mass, produces an acceleration of 1 cm/s2:
3rd Law of Motion:

Newton's third law states that if two bodies interact, the force exerted on body 1 by the body 2 is equal to and opposite the force exerted on the body 2 by body 1.

F12 = - F21

In other words, forces always occur in pairs of that a single isolated force cannot exist. The body 1 exerts on body 2 is sometimes called action force; while the force body 2 exerts on body 1 is called the reaction force. In reality, either force can be labeled the action or reaction force. The action force is equal in magnitude to the reaction force and opposite in direction. In all cases, the action and reaction forces act on different objects.

Action-Reaction Force

FIRE: Introduction

ALL ABOUT FIRE  Fire is the most common serious hazard that one faces in an industry or residential complex. While proper procedure ...